The Webserver and WebSocket functions are ideal for building browser-based GUIs on mbed-enabled hardware. Mbed LPC11u24 acting as a webserver to a Windows laptop. The code runs on most ARM mbed platforms such as the LPC11U24 shown in the picture below: PPP-Blinky emulates a standard dial-up modem and therefore connects to Windows, Linux or Adroid machines. No ethernet port is required - PPP-Blinky uses a serial port to send IP packets to your PC. PPP-Blinky uses the industry-standard PPP (Point-to-Point) Protocol and a tiny 'stateless' TCP/IP stack. The code runs on processors with as little as 8k RAM, for example the Nucleo-L053R8 board.

PPP-Blinky is a tiny library that enables Internet protocols (IPv4) to any mbed target hardware by using only a serial port. Note: The source code is at the bottom of this page.Ī Windows desktop showing PPP-Blinky in the network connections list. PPP-Blinky - TCP/IP Networking Over a Serial Port ¶

Creating a Dial-up Connection in Windows.

PPP-Blinky - TCP/IP Networking Over a Serial Port.

Ip over serial ppp